SPEAKERS

Speakers

Meet renowned speakers at the connector user conference

Meet the connection technology experts

Here you can find all the information about the speakers at the connector user congress. Meet the industry experts on site in Würzburg and take the opportunity to network!

Fabian Altenbrunn

Field Application Engineer KAM eiCAN | Würth Elektronik eiSos GmbH & Co. KG

  • Learn more

    Professional Experience:

    2009 – 2014: Prozessengineer for the departments SMT, THT and COB

    2014 – 2016: Productmanager/ NPI at EMS company

    2016 – 2019: Head of Customer-/ Test development

    since 2019: Field Application Engineer for Key Account customers national and international


    Education:

    2009 – 2012: Training as a semiconductor technologist

    2009 – 2014: Dual studies in electrical engineering at HS Schmalkalden (B. Sc.) and at HASEC Elektronik GmbH

Hüseyin Anaç

Field Application Engineer | NCAB GROUP GERMANY

  • Learn more

    Hüseyin Anaç is a trained electronics engineer with over 20 years of professional experience in the electronics sector. He built up his field experience as a technician for packaging machines and later deepened this as a commissioner for wet chemical systems for the production of photovoltaic cells in the areas of mechanics, electrics, electronics and software. In 2008 he switched to consulting work as a team leader in component sales. Mr. Anaç has been employed by NCAB Group Germany since 2013 and has worked in the printed circuit board sector, at that time as a technician and since 2019 as a field application engineer.

Stephan Bächle

Field Application Engineer | Würth Elektronik eiSos GmbH & Co. KG

  • Learn more

    Stephan Bächle was born 1968 in Lindenberg and started early playing with Electronic Items.


    Toys were only interesting if they also contained electronics. After an apprenticeship as a car electrician, he attended the master school in Nuremberg to deepen his knowledge. 


    This was followed by various sales activities for electrical and electronic components until Mr. Bächle joined Würth Elektronik as a sales representative in 2011.


    After 3 years of further training at the technical academy of Würth Elektronik eiSos, he took on the role of Field Application Engineer for electromechanical components in Bavaria.


    This includes training of sales representatives as well as the creation and implementation of customer seminars and specialist lectures.

Marcel Baltes

Manager R&D Product Engineering | TE Connectivity Germany GmbH

  • Learn more

    Marcel Baltes studied mechanical engineering and industrial engineering at the universities of Wiesbaden and Darmstadt. Since 2014, he has been working as a development engineer at TE Connectivity Automotive. The focus is on the development, qualification and release of conductor connection technology for plug contacts in the areas of electromobility and miniaturization. Since 2023, he has been responsible for the development of metal ultrasonic welding.

Prof. Thomas Bergs

Fraunhofer Institute for Production Technology IPT

  • Learn more

    Vita will follow shortly

Martin Bleicher

Director Engineering | TE Connectivity Germany GmbH

  • Learn more

    Martin Bleicher studied mechanical engineering at Aalen University of Applied Sciences (1990 - 1994). In 2004, he completed a part-time Master of Business Administration program at the University of Augsburg and the Katz Business School in Pittsburgh, USA. while working. 


    He has worked in product development at TE Connectivity Germany GmbH since 1994, specializing in stamping and forming technology, surface technology, contact surfaces and product management. In addition to the basic orientation towards product development of stamped parts, he was responsible for various transformation and strategy projects. From 2004 to 2011 he was also deputy plant manager for the lead plant in Woert. From 2010 to 2013 he started and implemented the technical savings based on the VAVE method. 

    From 2013 to 2016 he was responsible for the realignment of a large product line. 


    Currently he oversees product development for terminals worldwide in the Automotive business unit, including advanced engineering in this area. 

Kilian Brans

Research Assistant & Head of the Copper Processing Innovation Network | RWTH Aachen University

  • Learn more

    Kilian Brans studied mechanical engineering with a specialization in production technology at RWTH Aachen University. Since 2021, he has been working at the Manufacturing Technology Institute (MTI) of RWTH Aachen University in the Cutting Technology Department as project manager and research assistant with the research focus "Machining of lead-free copper base materials." Since 2022, Mr. Brans has been head of the Copper Machining Innovation Network (IKB) and is thus the central contact person for the copper machining topic at the MTI.

Ralf Damm

bda connectivity GmbH

  • Learn more

    Dipl.-Ing Ralf Damm, born 1960 in Giessen, studied news and microprocessor technology at the Giessen-Friedberg University of Applied Sciences.

    Since 1987 he has been employed by the cable manufacturer bda connectivity GmbH in Asslar, initially in the field of development, installation and distribution of networks for data technology.

    Ralf Damm is currently responsible for the development of communication cables as well as HF and EMC measurement technology at bda connectivity GmbH.

Daniel De Monte

Member of the Board | wemonte AG

  • Learn more

    Daniel De Monte, 38 years old, M.Sc. Mechatronics at the University of Stuttgart, is co-founder and member of the board of wemonte AG (Stuttgart) and, with 10 years of experience in the field of end-of-line test technology, a proven expert in contacting technology, test adaptations and EOL test plugs.

    Mr. De Monte has gained his expertise in several years of department management of design and development as well as business field development at a renowned company for test tech-nology. In 2022, he founded wemonte AG together with a business partner and became self-employed in this field.

Herrmann Eicher

Project Manager Product Development | ept GmbH

  • Learn more

    Hermann Eicher is a project manager in product development at ept GmbH, a company that produces connectors for the industrial and automotive markets. The focus of his work is on press fit technology. Due to his many years of experience, Mr. Eicher is still involved in every step of the development process at ept GmbH to this day. His work begins with an idea, which is translated into a design and finally delivered as a high quality product that ensures a high precision and reliable standard. As a member of international working groups and committees, he has worked for over ten years on the publication of a press fit specification and a scientific and technical paper. Hermann Eicher has three decades of practical experience in his field, ranging from mechanical production to physical and technological development. He shares his passion for press-fit technology with aspiring engineers and in this context is the supervisor of bachelor's and master's theses.

Herbert Endres

Consultant | EndresConsult

  • Learn more

    After completing his apprenticeship as a radio and television technician, Herbert Endres studied communications engineering at the Technical University of Nuremberg. He began his career as a project and sales engineer at AEG in Nuremberg and in 1975 moved to the components division at AEG Telefunken as a product manager for capacitors. After further positions at TRW and Labinal Components & Systems, he went to Molex in Heilbronn in January 1994 to market connectors for telecommunications worldwide as head of product management. Since July 2017 he has been working as a freelance consultant for questions relating to connectors.

Marius Fedler

Lüdenscheid Plastics Institute

  • Learn more

    Education/Studies

    1987-1990 apprenticeship as plastic moulder at Quante AG

    1990-1997 Responsible at Quante AG (later 3M) for

    Introduction and optimization of new injection moulds in

    the manufacturing

    1998-2001 mechanical engineering studies, specialization in plastics technology at

    of the University of Applied Sciences Südwestfalen

    2001-2003 Employee of Process Engineering at the Kunststoff-Institut

    2003-2014 Head of Process Development

    2014-2015 Head of Application Technology/Process Integration

    2015 - Head of Sales

    2018 - Head of the Kunststoff-Institut Südwest

    2021 - VDWF Lüdenscheid branch

Dr. Alphonse Foyet

Associate R&D Chemist | DuPont Electronic and Industrial

  • Learn more

    After completing his doctorate in physical chemistry and electrochemistry at the Martin Luther University Halle-Wittenberg (Germany) in 2007, Dr. Adolphe FOYET spent three years as a postdoctoral researcher in the field of materials and composites at the Eindhoven University of Technology in the Netherlands. Since 2010 he has worked at Dow Electronic Material as a Senior R&D Chemist and since 2019 at DuPont Electronic & Industrial as an Associate R&D Chemist. He specializes in connector materials, integrated circuits and passive component metallization. He worked on various electroplating products such as gold/gold alloys, tin/tin alloys, silver/silver alloys and white bronze; He received several granted patents and published more than 15 articles in various specialist journals.

Andreas Glauber

Business Development Manager | Diehl Brass Solutions

  • Learn more

    Andreas Glauber joined Diehl Brass Solutions in 2022 as Business Development Manager. After his training as a manufacturing mechanic, he studied materials technology at the Nuremberg University of Technology. Within the scope of the current activity, he advises and accompanies industry partners in the alloy selection in the field of CuZn alloys.

Dr. Thomas Gneiting

Managing Director | AdMOS GmbH

  • Learn more

    Dr. Thomas Gneiting is the founder and managing director of AdMOS GmbH, a company that focuses on modeling, simulation and design support. After studying at Esslingen University, he worked as a development engineer for digital controls at FESTO in Esslingen. He then worked for four years in a joint research project between Esslingen University and the Brunel University of West London, where he received his doctorate in 1997. In the same year, Thomas Gneiting founded the company AdMOS in Frickenhausen near Stuttgart. One of Dr. Gneiting's main focus is to support customers in the development of connectors, where all aspects of electromagnetic compatibility (EMC) and signal integrity (SI) are considered already in the design phase by electromagnetic simulations and verified experimentally after production.

Stephan Gross

Global Director Technical Marketing | Boway Deutschland GmbH

  • Learn more

    For 29 years within the copper industry in various fields of activity (technical marketing, process engineering, quality and sales). After more than 28 years at Wieland-Werke AG, he has been working for Ningbo Powerway Alloy as Global Director Technical Marketing since 2020.

Julian Guter

Process Engineer | Wieland-Werke AG

  • Learn more

    EDUCATION&STUDIES

    09/2015 to 02/2020 Wieland- Werke AG

    Study according to the Ulm model

    Mechanical Engineering B. Eng. (FH) Focus on design and development with training as an industrial mechanic

    03/2019 to 07/2020 DVS

    International Welding Engineer


    WORK EXPERIENCE

    07/2019 to 10/2019 Wieland Werke AG

    Internship abroad in the Thermal Solutions business unit

    in Chicago

    03/2020 to date Wieland Werke AG

    Process engineer in the Rolled Products business unit

    in Vöhringen

Sebastian Haas

R&D/Product Development Engineer | TE Connectivity Germany GmbH

  • Learn more

    Sebastian Haas is an R&D/Product Development Engineer at connector and contact manufacturer TE Connectivity. Since 2022 he has been responsible for the design of ultrasonic metal welding connections and the corresponding research into the ultrasonic welding process. He specifies the ultrasonic welding process of terminal contacts up to the qualification of the connection. In the automotive sector, he is primarily responsible for high voltage applications with conductor cross-sections from 35 mm² to 120 mm². 

    He graduated with a Master of Science in Mechanical and Process Engineering from the Technical University of Darmstadt with a thesis on the structuring of connector contact surfaces.

Markus Hildmann

Field Application Engineer | Würth Elektronik eiSos GmbH & Co. KG

  • Learn more

    M.Eng. Markus Hildmann, born in Göttingen in 1988, studied Computer Engineering (B.Eng.) and Systems Engineering (M.Eng.) at the Technical University of Nordhausen. Then he worked for 10 years as a hardware developer in the field of battery management systems. Since 2022, he has been employed as a Field Application Engineer at Würth Elektronik eiSos GmbH & Co. KG in the field of electromechanics.

Andreas Huhmann

Strategy Consultant | Harting Stiftung & Co. KG

  • Learn more

    Andreas Huhmann studied physics and now works as a strategy consultant for HARTING Stiftung & Co.KG. As a board member of the manufacturer-independent technology initiative SmartFactoryKL eV, he is involved in the implementation of Industry 4.0. In particular, the importance of intelligent connectivity for the modularization of production systems is a focus of his strategic work and the content of numerous publications and lectures.

Kim Ibrahim

Business Development Manager EMEA (Nye) | Fuchs Lubricants Germany GmbH

  • Learn more

    Kim Ibrahim studied industrial engineering in Mannheim with a focus on technical product management and has been working in the lubricants industry at FUCHS since 2013. After two years as a project manager in the field of coatings, she switched to product management with a focus on lubricating greases in special applications. Since 2023, she has been working for Nye Lubricants, which focuses on the lubrication of complex technologies within the FUCHS Group and supports customers within the EMEA region.

Stephen Kaminski

Head of Department Innovation| TE Connectivity Germany GmbH

  • Learn more

    Mr Kaminski studied communications engineering at the Stuttgart Cooperative State University. Through his many years of professional development within Bell-Labs mobile communications research (at Alcatel-Lucent), he has acquired a broad, innovative portfolio of expertise in international projects. He is the inventor of a total of 67 granted patents and co-author of the book "Digital Data Integrity", as well as several scientific contributions on various topics in communications engineering. Not least due to his work as a scientific employee at Esslingen University of Applied Sciences, as well as his wide-ranging private activities, his knowledge spectrum extends to other areas such as electronics and microprocessor technology, physics, mechatronics, precision engineering and aerospace technology. He is now Manager of the Innovation department within the ERNI Product Development at TE Connectivity.

Sascha Kamps

RWTH Aachen University

  • Learn more

    Vita will follow shortly

Dr.-Ing. Helmut Katzier

Engineering office for construction and connection technology

  • Learn more

    Dr. Helmut Katzier studied communications engineering at the Darmstadt University of Applied Sciences and theoretical electrical engineering at the Technical University of Darmstadt. He then worked as a research assistant at the Chair of Theoretical Electrical Engineering there for five years. After his doctorate, Dr. Katzier at Siemens AG in the public networks division. From July 1, 2006 to February 29, 2012 he was an employee of TietoEnator Deutschland GmbH and Tieto Embedded Systems GmbH. Since March 1, 2012, he has been working independently in the areas of development, consulting and training. His diverse areas of work include, among other things, assembly and connection technology and in particular the subject areas of printed circuit boards, connectors and high-speed transmission technology. At the Esslingen Technical Academy he leads the seminars on connector technology, circuit board technology, cables and wires, high-speed design of electronic assemblies and systems as well as the seminar on EMC-compliant device and system design. He is also a speaker in the seminar Design of High Frequency Circuits.

Markus Klingenberg

Head of Research and Development | IMO Oberflächentechnik GmbH

  • Learn more

    Dipl.-Ing. Markus Klingenberg has been working at IMO Oberflächentechnik GmbH as head of research and development since 2017. After training as an electroplater, he studied surface technology and materials science at the Aalen University of Applied Sciences. From 1997 until today, he has held various positions in the strip electroplating sector as head of quality assurance and production manager and has more than 20 years of expert knowledge in the area of research and development.

Ilhan Körbulak

Managing Director | OTMK GmbH

  • Learn more

    Ilhan Körbulak is in his function as director at the company OTMK GmbH in Pforzheim and is responsible for the machines and plant technology. Previously, he held various positions in surface technology as director, manager, technical sales, product manager and process technology at various companies. 


    Since 2004 he has been working in surface technology in the areas of connectors, contacts, printed circuit boards and functional components in the automotive, aviation and medical industries. Due to his long professional experience, he knows what is important in the industry.


    In addition to his career, he is also certified as an auditor as AIAG CQI-11 and IATF 16949:2016.

Harald Kränzlein

TE Connectivity Germany GmbH

  • Learn more

    Vita will follow shortly

Stephan Krause

VP Sales EMEA | Nano Dimension

  • Learn more

    Stephan Krause, Dipl. Wirtschaftsingenieur (FH Wedel) & MBA (ESADE), has been working on various technologies for 3D electronics and PCB prototyping since 2012. Since the end of 2021, he has been managing sales in EMEA for various Nano Dimension printing processes, including micro- and precision 3D printing of polymers and ceramics.

Dr. Markus Kury

Chief Product Officer | Cubicure GmbH

  • Learn more

    Dr. Markus Kury is Chief Product Officer at Cubicure GmbH. During his studies at the Vienna University of Technology, he developed photoreactive resin systems for additive manufacturing. After  his studies, he worked at Cubicure as Product Manager Materials. Today, together with his Products Team, he is responsible for product and customer-related topics at Cubicure.

Stefan Langewellpott

Technical Support Manager | NCAB GROUP GERMANY

  • Learn more

    Stefan Langewellpott is a trained tool mechanic (stamping and forming technology) with further training as a mechanical engineering technician. Mr. Langewellpott has over 25 years of professional experience in the field of printed circuit board and was able to gain his first experience as early as 1997 and continuously expand it.

    In 2017, he joined the NCAB Group Germany as Technical Support Manager. Since 2023, his responsibilities have included technical training for customers and colleagues in the field of printed circuit boards.

Dr. Joachim Lapsien

Head of Product Marketing | CETA Testsysteme GmbH

  • Learn more

    Dr. Joachim Lapsien studied physics at Heinrich Heine University in Düsseldorf, specializing in laser and plasma physics, where he completed his doctorate in the field of optical measurement technology. He has been working in industrial leak and flow testing at CETA Testsysteme GmbH, Hilden, since 2003. Dr. Lapsien is head of the product marketing department and is a regular speaker on industrial leak and flow testing topics with presentations (lectures, posters, workshops, online seminars) at national and international conferences (e.g. AMA Conference, World Conference of Non-Destructive Testing, DGZfP Annual Conferences, DGZfP Technical Seminars on Leak Testing and Leak Detection, User Congress Connectors, Symposium Connectors, Innosecure, Power of Electronics). He has also published technical articles in relevant specialist journals and books. Dr. Lapsien is also actively involved in the DGZfP Leak Testing Technical Committee and the DIN Leak Testing Standards Committee.


    Remark: DGZfP is the German Society for Non-Destructive Testing

Lucas Lässig

Product Manager | PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Lucas Lässig (born 1996) studied mechatronics at the Ostwestfalen-Lippe University of Applied Sciences in Lemgo. Since 2019, he has been working in product management for the PCB connection technology sector and is responsible for the portfolio of PCB connectors of the COMBICON S product line, which includes the connection cross-section up to 1.5 mm².

Dr.-Ing. Thorsten Leist

Analytics Expert | HTV GmbH

  • Learn more

    Studied Materials Science at Technical University Darmstadt and got his PhD with focus on high temperature piezoelectric ceramics in 2011. Worked for 10 years in the field of heat treatment of steels as a R&D Engineer. Since beginning of 2023 he works at HTV Conservation GmbH as scientific employee with the focus on materials testing.

Ulf Leuchner

Ulf Leuchner

Head of Product and Application Management DACH | HARTING Germany

  • Learn more

    Professional experience


     Head of Product and Application Management DACH, HARTING Technology Group (since April 2019)


     Product Manager and Teamlead Data Connectors, Phoenix Contact (2007 - 2019)


     Product Manager, ROSE Systemtechnik (2005 - 2007)


    Educational background


    Dipl.-Ing. Communications and Communications Engineering, Ostwestfalen-Lippe University of Applied Sciences


    Ulf Leuchner is an experienced product manager and specialist for industrial connectors. After studying communications and telecommunications engineering, he started his career at ROSE Systemtechnik and then moved to Phoenix Contact, where he held various positions in product management and marketing over the years. During this time, his professional focus was on industrial data connectors. Since April 2019, he has been Head of Product and Application Management DACH at the HARTING Technology Group, where he is responsible for regional product management and marketing for the target markets of Germany, Austria and Switzerland.

Vera Lipp

Head of PCB & Electronics – R&D | Max Schlötter GmbH & Co. KG

  • Learn more

    Vera Lipp is responsible team leader in the PCB & Electronics division since 2020. She is responsible for the products and projects in the field of PCB&electronics, to develop new electrolytes and processes. She previously worked as a project manager in the field of cathodic corrosion protection and pre-treatment processes. Her career began in 2013 at Dr.-Ing. Max Schlötter GmbH & Co. KG. After working at fem in Schwäbisch Gmünd for four years and studying at the university in Aalen.

Marcel Mainka

Laboratory engineer | Weidmüller Interface GmbH & Co. KG

  • Learn more

    Marcel Mainka studied physics at the University of Bielefeld and worked on spectroscopic investigations of self-organizing monolayers as part of his studies. He has been working in the technology laboratory at Weidmüller since 2012 and is involved in material and surface analysis, product and process development, lifetime testing and project management in the field of electrical connectivity. The content of his work is incorporated into national and international publications. He received the Paul and Dee-Dee Slade Young-Investigator Award at the 2023 IEEE Holm Conference for the content he will present.

Stefan Masak

Sr. Principal Development Engineer | TE Connectivity Germany GmbH

  • Learn more

    Stefan Masak studied general mechanical engineering at the TU Darmstadt. He began his professional career at the company AMP as a calculation engineer and programmer. As Head of Department, he led global teams in simulation and engineering IT. Since 2018, he has been working in the contact development of platform engineering at TE Connectivity. As Sr. Principal Engineer he takes care of the new and further development of contact systems, as well as their design.

Markus Meurer

Chief Engineer / Head of Department | MTI – Manufacturing Technology Institute

RWTH Aachen University

  • Learn more

    Vita will follow shortly

Bernhard Mund

EMC measurement technology/standardization | bda connectivity GmbH

  • Learn more

    After his apprenticeship as a radio and television technician, Bernhard Mund studied communications and microprocessor technology at the FH Gießen-Friedberg. Since 1985 he has been an employee of bda connectivity GmbH, among other things as development manager in the field of communication cables. He is currently responsible for EMC measurement technology and standardization. 


    In addition to his work for bda connectivity GmbH, Bernhard Mund has been active in national and international standardization for more than 35 years, including as chairman of the national committee UK 412.3 Coaxial Cables and as secretary of IEC SC 46A and of CENELEC SC 46XA, Coaxial Cables. Other standardization activities include participation since 1995 in IEC TC 46/WG 5, Shielding effectiveness of cables and components, and in IEC TC 46/WG 9, Assembled cables.

Dr. Frank Ostendorf

Sr. Manager Engineering | TE Connectivity Germany GmbH

  • Learn more

    Dr. Frank Ostendorf studied physics at the University of Osnabrück and received his doctorate there in 2008, specializing in surface physics and nanotechnology. Between 2006 and 2008, he also worked as a consultant for the company RHK-Technology in the field of engineering and customer support for scanning probe microscopes. 


    Since 2008, he has been an expert on fundamental contact physics and tribological issues of connector systems and has published numerous papers in this specialized field in national and international journals and books as well as at relevant conferences.


    After holding positions in the technology laboratory of Weidmüller Interface GmbH & Co. KG and as head of materials and failure analysis at HARTING AG & Co. KG, he is now responsible for the pre-development of "Terminals & Connectors" at TE Connectivity Germany GmbH and deals with innovative topics in the field of automotive connectors.

Matteo Paleari

Senior Products and Service Specialist | UL Solutions

  • Learn more

    Matteo graduated in Materials Engineering at Politecnico di Milano. 

    Within the Engineered Materials operating unit, he is leading all structured  sales request that require technical support in Europe. 

    With 18 years within UL Solutions,  he gathered a broad experience first as a certifier especially of Plastics, Electrical Insulation System, then in the Sales department he expanded covering in addition performance testing of polymers for E&E and automotive industries, with focus on sustainability services. 

Dr. Konstantinos Panos

Head of Application Laboratory & Technical Consultant/focus on plug contacts | Helmut Fischer GmbH Institute for Electronics and Measurement Technology

  • Learn more

    Professional experience


    Since 2020: Helmut Fischer GmbH Institute for Electronics and Metrology Head of Application Laboratory as well as technical consulting with focus on plug contacts.


    2014 - 2020: TE Connectivity Germany GmbH 


    2017 - 2020: Department Manager Advanced Process Engineering (since 4.2019 Process Engineering) as well as expert for process development:

    • Expansion of agile, near-series pilot production
    • development of innovative manufacturing processes 

    2016 - 2017: Group Manager Advanced Process Engineering. 


    2014 - 2016: Development Engineer Center of Excellence:

    • Traceability and high-speed laser marking
    • High-speed coating thickness measurement
    • Alternative coating processes. 

    Studies and Education


    2009 - 2014: PhD at the Max Planck Institute for Solid State Research. 


    2003 - 2009: Physics Diploma at the University of Stuttgart

Stefan Raab

Manager R&D/Product Development Engineering | TE Connectivity Germany GmbH

  • Learn more

    Professional experience:

    Since 2016: Manager for metal connectors product development in Automotive segment with focus on miniaturization and E-Mobility

    2010 – 2016: Product engineer in factory located engineering

    • Technical product responsibility and development of automotive stamping product

    • Introduction, validation and release of new product variants

    • 3 months China Engineering Expat (2012, TE Connectivity Suzhou)


    Academic Studies

    2007-2010: Mechanical Engineering, Cooperational University Heidenheim (B. Eng.) at TE Connectivity 


Martin Räthlein

Technical Lead Engineer | Rosenberger Hochfrequentechnik GmbH & Co. KG

  • Learn more

    2011: Completion of a master's degree in mechanical engineering / product development, FH Schmalkalden


    2011 - 2014: Designer in the Medical & Industries area at Rosenberger Hochfrequenciestechnik GmbH & Co.KG, Fridolfing


    2014 - 2023: Mechanical development engineer in the R&D area at Rosenberger Hochfrequenciestechnik GmbH & Co.KG, Fridolfing since 


    2023: Technical Lead Engineer for structural mechanics in the R&D area at Rosenberger Hochfrequenciestechnik GmbH & Co.KG, Fridolfing

Manuel Rüter

Principal Standardization & Consortia, Industrial, Technology | TE Connectivity Industrial GmbH

  • Learn more

    Manuel Rüter has been responsible for technology management, standards and consortia in the Industrial Business Unit of TE Connectivity since 2021. He has 20 years of experience in various roles and companies in the communications and connectivity industry.

Prof. Dr.-Ing. Martin Ruskowski

Chairman of the board | Technologie-Intiative SmartFactory KL e.V.

  • Learn more

    Education:

    1990 - Study of Electrical Engineering, Leibniz University Hannover

    1996 - Diploma

    2004 - Doctorate at the Institute of Mechanics at Leibniz University Hanover

    Active magnetic guides in machine tool construction


    Occupation:

    1996 - Research assistant,

    Institute of Mechanics, Leibniz University Hannover

    1998 - Scientific Assistant (C1) and Head of Laboratory Operations, Institute of

    Mechanics, Leibniz University Hannover

    2005 - Development Engineer Application Functions, Lenze Drive Systems

    GmbH, Hameln

    2006 - Head of Development Motion Control Software/Application Functions,

    Lenze Drive Systems GmbH, Hameln

    2008 - Head of Application, Development, Software Development, Instrumon

    Structural Testing Systems GmbH, Darmstadt

    2011 - Head of Research and Development, Carl Cloos Schweißtechnik GmbH, Haiger

    2015 - Vice President Global Engineering,

    KUKA Industries Group, Obernburg am Main/Augsburg

    2016 - Vice President Global Research and Development, KUKA Industries Group, Obernburg am Main/Augsburg

    2017 - Professor of Machine Tools and Controls, TU Kaiserslautern

    2017 - Scientific Director of Innovative Factory Systems (IFS),

    German Research Center for Artificial Intelligence (DFKI)


    Research fields: 

    Mechatronic systems, in particular industrial robots as machine tools

    Novel control and integration concepts for automation Artificial

    Intelligence in automation technology


Andy Schäfer

Product Manager | PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Andy Schäfer (1992), a technician specializing in electrical engineering, has been working as a product manager since 2016. He is responsible for the COMBICON data portfolio at PHOENIX CONTACT since 2021. This includes PCB terminal blocks and connectors that are suitable for ethernet-based data transmission.

Arndt Schafmeister

Senior Specialist Board-to-Board Connectors | PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Arndt Schafmeister studied mechanical engineering at the Ostwestfalen-Lippe University of Applied Sciences in Lemgo. He has been working in product development for PCB connection technology at PHOENIX CONTACT since 2006. Since 2016, he has focused on developing board-to-board connectors in the FINEPITCH product line.

Marcel Scheidig

Head of Technology | C. Jentner GmbH

  • Learn more

    Marcel Scheidig studied Chemical Engineering at KIT, specializing in Process Engineering. During his studies, he gained initial insights into this fascinating industry as a working student in a reel-to-reel plating company. Since 2016, he has been employed at C. Jentner GmbH as Head of Technology and developed the patented Jentner Smart Plating System with his team. This software enables the automation and digitization of manual electroplating processes, thus providing valuable insights into the coating process.

Thomas Schulze

Product Manager | PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Thomas Schulze studied industrial engineering with a specialization in mechanical engineering at the University of Paderborn. He has been working in product management for the PCB connection technology area since 2014. He has been in charge of the portfolio of board-to-board connectors in the FINEPITCH product line since the end of 2019 and has been responsible for this area as group leader since March 2023.

Florian Seuß

Head of Development | Diehl Brass Solutions

  • Learn more

    My name is Florian Seuß. I grew up and went to school in Erlangen, where I also studied materials science with a focus on materials in medicine. I finally came to my current employer, Diehl Brass Solutions, through my doctoral thesis on "antimicrobial brass". I am the head of the development department for almost 4 years now and am currently mainly working on the topic of lead-free brasses.

Peter Stahl

Technical Marketing / Business Development | Wieland-Werke AG

  • Learn more

    Career stages at Wieland-Werke AG

    07/2018 – today technical customer consultant at the Business Unit Rolled Products

    (Location: Ulm)

    11/2010 – 06/2018 scientific employee in the department Central Laboratory & Development

    (Location: Vöhringen)


    University

    10/2010 Degree with diploma

    10/2005 – 10/2010 Studies at the Ilmenau University of Technology (materials science)

    03/2010 – 10/2010 Diploma thesis at Daimler AG in Ulm

    Subject: "Laser welding of high-strength steels“


    Further knowledge

    02/2015 – 06/2015 degree as international welding engineer (IWE)

    according to the guidelines of the IIW and the DVS

Alexander Stammen

Product Manager / PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Alexander Stammen studied mechanical engineering and applied entrepreneurship. After working in electronics and high-voltage storage development in the automotive sector, he joined PHOENIX CONTACT in 2023 as Product Manager for connectors for electrical energy storage systems.

Cord Starke

Manager Development IFC field & installation | PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Studied mechanical engineering at the Ostwestfalen-Lippe University of Applied Sciences in Lemgo.


    Working in product development for round connectors at PHOENIX CONTACT since 2000.


    Focused on developing sensor actor connectors M12 and M8  in shielded versions.



Pawel Strzyzewski

Senior Staff Engineer | UL Solutions

  • Learn more

    MSc in Electronics. 1997-2002 Study at the Lodz Technical University, Poland. 


    2007 – till today: UL Solutions Poland. Project Engineer involved in UL certification of electrical devices, with the focus on connectors and terminal blocks. Knowledge of the following Standards: UL1059, UL1977, UL2237 and UL2238. Since 2014 acting as „Lead Regional Reviewer“ for Europe.


Ralf Tillmanns

Development | Weidmueller Interface GmbH & Co. KG

  • Learn more

    Dipl. Ing. (TH) Ralf Tillmanns studied communications technology at the Duisburg University of Technology. He gained more than 20 years of experience in network technology. Since 2000, his focus has been on the development and measurement technology of data connectors as well as on the IT cabling infrastructure. In addition, Ralf Tillmanns is actively involved in various national and international standardization committees for the company. Among others, in the following committees: German speaker IEC TC46; IEC TC 46/WG9; IEC TC 46/SC46C WG7; IEC SC48B WG3,WG5; SC65C

Christoph Voelcker

Würth Elektronik eiSos GmbH & Co. KG

  • Learn more

    Vita will follow shortly

Jonas Weirauch

Developer | PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Jonas Weirauch (1991) studied electrical engineering and wrote his master's thesis in the field of surge protection at PHOENIX CONTACT in 2018. After graduating, he switched to product development for PCB connection technology.

Tobias Wiemann

M.Sc. Mechatronic systems engineering | PHOENIX CONTACT GmbH & Co. KG

  • Learn more

    Working in development laboratory at PHOENIX CONTACT. Focused on round connectors.



Bennet Winkelmann

HARTING Germany

  • Learn more

    Professional experience


    Product and Application Manager DACH, HARTING Technology Group (since Oct. 2022)


    Technical Inside Sales, HARTING Technology Group (April 2022- Sept. 2022)


    Technical Sales, CMC Engineering GmbH (2020 - 2022)


    Laboratory Technician, HARTING Technology Group (Jan. 2017 - Sept. 2017)


    Education


    Bachelor of Science in Industrial Engineering and Management, Osnabrück University of Applied Sciences


    Apprenticeship as electronics technician for devices and systems, HARTING Technology Group


    Bennet Winkelmann works as Product & Applications Manager at the HARTING Technology Group. In this position, he is responsible for the product portfolio of data and interface connectors in the DACH target market (Germany, Austria, Switzerland).


    In his role as Product & Applications Manager, Bennet Winkelmann provides customers and partners with technical advice on the products. He also focuses on introducing new products to the market. He also organises product training courses for internal employees and external partners in order to deepen and disseminate product knowledge.

Johannes Winkler

Rosenberger Hochfrequenztechnik GmbH & Co. KG

  • Learn more

    Johannes Winkler joined Rosenberger in 2015 and is currently head of the electronics development team in Rosenberger's research and development department. 

Dr.-Ing. Robert Zauter

Director Technical Marketing Europe | Wieland-Werk AG

  • Learn more

    UNIVERSITY

    1982 – 1988: Study of materials science / metallic materials at the University of Nuremberg-Erlangen (Germany). Degree: Diploma in Engineering.

    1988 – 1992: Doctorate at the same university. Graduation with the title “Dr.-Ing.” 

    Topic of the thesis: Thermo-mechanical fatigue behaviour of AISI 304L stainless steel, which is commonly used in heat exchanger tubes in atomic power plants.


    POWER PLANT CONSTRUCTION INDUSTRY

    1993 – 2001: Working as a quality and senior material engineer in the power plant construction industry in Germany.


    COPPER INDUSTRY - WIELAND

    01.10.2001: Joining Wieland-Werke AG, Germany. First position in the R&D department. 

    Since 2003: Change to business unit “Rolled Products” into the “Technical Marketing” department. Worldwide active in positions as Product Engineer, Innovation Engineer, Senior Manager Application Engineering and Director Technical Marketing Europe, which is the current position.


Jasmin Zeyn

Sales Manager Polymer | Nano Dimension

  • Learn more

    Jasmin Zeyn (M.Sc. in Industrial Engineering) has been working in the field of 3D printing since 2016. She has already worked with various 3D printing technologies (e.g. HP and Stratasys) and has been published in the book "Industrialisierung der Additiven Fertigung" with an article about 3d printing. As Sales Manager Polymer at Nano Dimension, she is driving the advancement of micro and precision 3d printing.

Share by: